This chisel features a gouge shape 7 mm deep x 20 mm wide (9/32 x 25/32 inch) cutting area. For use with your Arbortech™ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This accessory will turn your angle grinder into a precision shaping tool. The clear, tough polycarbonate shield will allow you clear view of your work while redirecting the wood chips away from you. ...
These replacement screws are for the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains three of M3 Torx™ screws. The screws are high quality grade 12.9 Torx™ 9 head. This acc...
This replacement Torx™ key are for securing Torx™ M3 screws, found on the Arbortech™ Industrail Woodcarver blade #63-IND-FG-100. The package contains one key. This accessory tool can be used with the ...
This shaft kit can extend the reach of your wood carving activity by a depth of 3 inches (76 mm). Suitable for 4 and 4.5 inch (100 and 115 mm) angle grinders. The carbide blade at the end allows the s...
This hardened steel round file is 5/32 inch (4 mm) diameter), suitable for the mini carver blades used with the Arbortech™ product line of power carving woodworking tools.
For use with your Arbortech™ mini grinder, this package contains four grits (40, 60, 80 and 120) of the 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder ...
For use with your Arbortech™ mini grinder, this package contains four discs of 40 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (sc...
For use with your Arbortech™ mini grinder, this package contains four discs of 80 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (sc...
For use with your Arbortech™ mini grinder, this package contains four discs of120 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (sc...
For use with your Arbortech™ mini grinder, this 2 inch diameter blade offers a 3/8 inch (10 mm) depth of cut and a kerf width of 3/16 inch (4 mm). The tungsten carbide tip blades can be resharpened us...