Plan Author: Bob Hunter
Plan Contributors: John Olson, Kevin Boyle
Published Date: 2013
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Tools needed: Router, saw, clamps, drill and other common workshop tools
This jig plan also appears as a Bonus Article in the plan 31-MD-00961
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
This router jig is a specialist at through or stopped dadoes and grooves. Included is an exploded diagram.
For this special issue on routers, we asked a trio of seasoned router experts to share shop-made jigs they have found super handy over the years. We will provide the plans for each, and also show how ...
Say goodbye to rough and irregular edges the next time you cut a circle or ring. And, using the extended base of the trammel for added stability, as shown at right, you can detail an edge or rabbet th...
Mount your router to this simple-to-build jig, and guide it arrow-straight down the workpiece to rout flutes with dead-on precision.
Here is a quick-and-easy Self Centering Mortising jig that can be used on stock of various thicknesses and will always self-center.
Here is a jig for routing bookcase or cabinet-side dadoes that exactly match the thickness of your shelf stock. No special bits are needed. Just use an ordinary straight bit and a guide bushing.
Not only does this simple guide keep stock perfectly square to the router fence, it also supports the back edge of the routed stock to minimize tear-out.
Cutting on-the-money rabbets for half-lap joints with a portable circular saw and handheld router is a breeze with this two-in-one jig. Perfect for those who want great joinery but do not have a table...
Here is a no nonsense router jig that helps you trim solid-wood edging perfectly flush with plywood panels. No more heavy sanding and no risk of sanding through the thin plywood veneer. The jig base a...
Need a foolproof way to trim solid wood edging on plywood panels. This router-table mounted fence will do just fine.
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.