Timber Frame Mail Box Post Woodworking Plan. Timber Frame Mail Box Post Woodworking Plan. WOOD®Store Here is a way to try your hand at timber framing without having to build a barn! You will learn to cut out mortises and tenons in the old fashion way with sharp chisels and a mallet. Although if you h... 31_MD_00964 31-MD-00964 7.95 WoodworkersWorkshop
Location

Timber Frame Mail Box Post Woodworking Plan.

31-MD-00964 - Timber Frame Mail Box Post Woodworking Plan.
Here is a way to try your hand at timber framing without having to build a barn! You will learn to cut out mortises and tenons in the old fashion way with sharp chisels and a mallet. Although if you have power tools that do the same, it will ease the work. Standard lumber from your local store is all you need.

Finished Dimensions
Height: 72 inches (182.9 cm)
Width: 5.5 inches (14 cm)
Length: 33.5 inches (85.1 cm)

Plan Author: John Olson

Plan Contributors: Nate Granzow, Lorna Johnson

Published Date: 2013

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: A full materials list and full size pattern for the box and back arm are included in this plan.

Tools needed: Drill, chisels, mallet, clamps and other common workshop tools.

Your Total:

31-MD-00964 - Timber Frame Mail Box Post Woodworking Plan. Selection

31-MD-00964PAPER - Timber Frame Mail Box Post Woodworking Plan. - Paper plan
USD 10.95 | 10 Points | In Stock
31-MD-00964PDF - Timber Frame Mail Box Post Woodworking Plan. - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Uncle Sam Flag holder or Mailbox Holder Yard Art Woodworking Pattern

We hope you enjoy our patriotic woodworking pattern! You need a piece of plywood measuring approximately 48 x 74 inches to cut out two sides. Or, cut out one piece of plywood about 72 x 25.25 inches ...

From USD 10.95
10 Points | In Stock
Canadian RCMP Officer Flag Holder or Mailbox Holder Yard Art Pattern

We hope you enjoy our Constable woodworking pattern! You need a piece of plywood measuring approximately 42 x 81 inches to cut out two sides. Or, cut out one piece of plywood about 72 x 27 inches and ...

From USD 10.95
10 Points | In Stock
Mailbox Stamp Roll Dispenser Downloadable Woodcraft Pattern

We may live in the electronic age of email, digital stamps and QR codes, but rolls of stamps are still being sold at the post office. Keep those stamps in one place with our Mailbox Stamp Roll Dispens...

From USD 2.95
2 Points | In Stock
Cow Standing Mailbox Decor Woodcraft Sign Pattern Downloadable

Base may be 1/2 or 3/4 inch thick stock. This sample is 4-1/2 x 8-3/4 inches, but it may be longer to accommodate another piece such as a small Cow, cutout of a barn, dowel fence posts, etc. We try to...

From USD 2.95
1 Point | In Stock
Kitchen Counter Set Woodworking Plan.

Organize your kitchen counters. This project keeps salt and pepper shakers, sugar, cream and condiments right at your fingertips. A lazy suzan, if installed, will smoothly turn the display. Coordinating napkin holder and knife rack complete the set.

USD 11.99
11 Points | In Stock
Garbage Truck Mailbox Woodworking Plan.

This garbage truck mailbox project is constructed primarily from 1/2 inch and 3/4 inch thick wood. This project utilizes a small size rural mailbox, referred to as a Size 1 or a Size T1. It measures approximately 19 x 6-1/2 x 8-1/2 inches.

USD 11.99
11 Points | In Stock
Schoolbus Mailbox Woodworking Plan.

This mailbox project is constructed primarily from 1/2 inch and 3/4 inch thick wood. This project utilizes a small size rural mailbox, refered to as a Size 1 or a Size T1. It measures approximately 19 x 6-1/2 x 8-1/2 inches. This woodworking plan provides full size illustrations.

USD 11.99
11 Points | In Stock
Patriotic Mailbox Woodworking Plan

An eagle sits on top of this colourful mailbox banner. The eagle and banner are made from 3/4 inch thick lumber. The alternating red and white sections are made from 1/4 inch thick plywood. This project has been designed to be easy to build and easy to paint.

USD 13.99
13 Points | In Stock
Hen House Mailbox Woodworking Plan

The four hens in the chicken coop are protected by the rooster who watches over the roost. A great mailbox decoration whether you live in the country or not. After all, some of us just like chickens. This woodworking plan provides full size illustrations and exploded view diagrams.

USD 17.99
17 Points | In Stock
Santa Holiday Mailbox Woodworking Plan

Ride-em cowboy, or should we say ride-em Santa? or Rudolph? or Snowman? These projects fit over a standard size #1 rural mailbox. They are easy to paint and easy to slip on the top of your mailbox. These winter time projects measure approximately 15-1/2 inches tall when completed.

USD 10.99
10 Points | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
Potting Bench Woodworking Plan.
Rowing Home Woodworking Plan -part of a 17 pattern package
Turned Writing Pens Woodworking Plan
Mission Style Baby High Chair Woodworking Plan
First Toys Collection - all 28 vehicle woodworking plans included.
Sasquatch Family Yard Art Woodworking Pattern
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.042613 Seconds Memory Usage: 1.694992 Megabytes
Kryptronic