Height: 37.5 inches (95.3 cm)
Width: 18.75 inches (47.6 cm)
Depth: 14 inches (35.6 cm)
Plan Author: Kevin Boyle
Plan Contributors: Lorna Johnson, Lucas Peters, John Olson
Published Date: Dec 2012/Jan 2013
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Tools needed: Tablesaw, drill, jig saw, biscuit joiner, sander and other common workshop tools
BONUS PLANS Included:
Dead-On Accurate Shelf-Pin Jig
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
These wine racks are easy to make and customize. Add more levels, make the racks longer, scroll saw the ends for a more ornate rack, then stain or paint as desired. Easily scale the pattern on your pr...
This basket is a fun project that can be used a great add-on gift when putting together a gift basket of fruit, flowers, pastry. Build with pine and tole paint or build from a hardwood and finish with...
This simple to build wine rack holds 24 bottles! Compact design is large enough to stand alone on the floor yet small enough to fit on a countertop. Make it from 1x12 oak or pine boards, no edge gluing required.
Up to ten bottles can be stored in this container. From 1/4 inch thick plywood, a magnificent scroll saw vine and grape design is displayed (24x24 inches). Designed to be used on the floor, a table, or a counter. Stunning birch veneer with birch plywood inlays.
Store up to two dozen wine glasses safely. Three pieces of 1/4 x 12 x 12 inch plywood and 3/4 inch thick hardwood were used to make this simple structure. This wall-mounted cabinet is a perfect match for our #19-W3190 Wine Caddy. All patterns are full size drawings.
Bears like wine too! A perfect accent for the cabin and a great gift or for anyone who loves wildlife. Project holds a wine bottle at an angle so the cork stays moist. Easy to cut from 7/16 and 3/4 inch pine. All patterns drawn FULL SIZE. Bear measures approximately 12 inches long.
Welcome your guests with a glass of wine. This convenient server fits almost anywhere. It holds a bottle of wine and four wine glasses. Project swivels on a Lazy Susan bearing.
Make this project as pictured or extend it to hold additional wine bottles. Holds bottles at correct angle to keep corks from drying out. Can be extended in 6-1/2 inch intervals for each additional wine bottle.
This easy-to-build stackable wine rack holds 6 bottles on each layer.
Looking for a handsome, versatile serving piece with plenty of storage for fine dinnerware and linens? This traditional oak beauty, with three spacious cupboards and drawers and seven adjustable shelves...
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.