Fold-Flat Sheet Goods Mover Woodworking Plan. Fold-Flat Sheet Goods Mover Woodworking Plan. WOOD®Store Made from just one sheet of 3/4 inch baltic birch plywood, a handful of hardware, and four locking swivel casters, this handy project makes transporting sheet goods around the shop a breeze. You simpl... 31_MD_00918 31-MD-00918 7.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Fold-Flat Sheet Goods Mover Woodworking Plan.

Fold-Flat Sheet Goods Mover Woodworking Plan.

31-MD-00918 - Fold-Flat Sheet Goods Mover Woodworking Plan.
Made from just one sheet of 3/4 inch baltic birch plywood, a handful of hardware, and four locking swivel casters, this handy project makes transporting sheet goods around the shop a breeze. You simply tip the rack to vertical, rest a sheet upright on it, then roll the mover to your tablesaw or bench. Next tilt the rack horizontal and slide the sheet onto the worksurface. At the tablesaw, you may want to push the mover to one side of the saw and use it as an infeed support to help steady the sheet as you cut. With the job completed fold the mover flat, and store it against a wall or hang it out of the way.

Plan Author: Gary Dean

Plan Contributors: Craig Ruegsegger, John Olson, Lorna Johnson

Published Date: 2012

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used baltic birch plywood, and laminated baltic birch plywood.

Tools needed: Tablesaw, drill press, bandsaw, and other common workshop tools

Your Total:

31-MD-00918 - Fold-Flat Sheet Goods Mover Woodworking Plan. Selection

31-MD-00918PAPER - Fold-Flat Sheet Goods Mover Woodworking Plan. - Paper plan
USD 10.95 | 10 Points | In Stock
31-MD-00918PDF - Fold-Flat Sheet Goods Mover Woodworking Plan. - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Cutting Platform and Sheet Goods Mover Woodworking Plan

Sheet goods often present a real challenge when it comes to cutting them down into project-sized pieces. Even if you have the room in your shop to maneuver a full sheet of plywood, single-handedly bal...

From USD 2.95
2 Points | In Stock
Fold-Flat Sheet Goods Mover Woodworking Plan.

Made from just one sheet of 3/4 inch baltic birch plywood, a handful of hardware, and four locking swivel casters, this handy project makes transporting sheet goods around the shop a breeze. You simpl...

From USD 7.95
7 Points | In Stock
Resources & Free Plans

Since 1998, we have curated the Internet's largest online woodworking resources database.

Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.

Visit Resources & Free Plans

Banner Adverts
Folding Chair plans
Bedroom Nightstand Plans
Loft Beds
Gun and Firearm Woodworking plans
Bathroom Vanity Plans
Bedroom Dresser Furniture Plans
Dining Table and Chair Furniture Plans
Kitchen Pantry Cupboard
Pony Coin Banks Woodworking Plans.
8ft Tall Sasquatch Yard Art Woodworking Pattern
Porch Swings
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2021 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2021 Kryptronic, Inc. Exec Time: 0.119356 Seconds Memory Usage: 2.485176 Megabytes
Kryptronic