Compressed Air Work Station Woodworking Plan Compressed Air Work Station Woodworking Plan WOOD®Store Build this caddy from one sheet of plywood and a few dimensional lumber scraps. It holds a small compressor, hose, nailers, fasteners, and other accessories in one ready-to-roll unit. If you are tired... 31_MD_00613 31-MD-00613 7.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Compressed Air Work Station Woodworking Plan

Compressed Air Work Station Woodworking Plan

31-MD-00613 - Compressed Air Work Station Woodworking Plan
Build this caddy from one sheet of plywood and a few dimensional lumber scraps. It holds a small compressor, hose, nailers, fasteners, and other accessories in one ready-to-roll unit. If you are tired of tripping over air hoses, lugging around an air compressor, or digging through cabinets for a nailer, here is a hassle-saving, easy-to-build project. All it takes is a few hours of your time. This project also works well as a garden cart, just be sure to use exterior grade plywood of you plan to leave it outside.

Finished Dimensions
Height: 42 inches (106.7 cm)
Width: 26.75 inches (67.9 cm)
Depth: 27.75 inches (70.5 cm)

Plan Author: Kevin Boyle

Plan Contributors: Bob Hunter, Doug Hicks, Roxanne LeMoine, Lorna Johnson

Published Date: 2009

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used solid pine and plywood.

Tools needed: Table saw, bandsaw or jigsaw, drill, router, and other common workshop tools

Your Total:

31-MD-00613 - Compressed Air Work Station Woodworking Plan Selection

31-MD-00613PAPER - Compressed Air Work Station Woodworking Plan - Paper plan
USD 10.95 | 10 Points | In Stock
31-MD-00613PDF - Compressed Air Work Station Woodworking Plan - PDF plan - download after paying
USD 7.95 | 6 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Sanding Supply Center Woodworking Plan

Left in the open, sandpaper will cup due to humidity. To keep this perennial problem in check and keep our sandpaper organized and away from dust, we came up with this multi-purpose cabinet. We have m...

From USD 9.95
9 Points | In Stock
Sanding Supply Center Organizer Woodworking Plan

Looking for that single location where you can store all of your sanding supplies? This WOOD magazine original, featuring a half-dozen easy-to-build projects, may be just the tick. It includes holders...

From USD 9.95
9 Points | In Stock
Easy Access Router Bit Organizer Woodworking Plan

When David Riel needed router-bit storage close at hand, he built this organizer and attached it to the side of his freestanding router table. Whether you attach it to your router table or to the wall...

From USD 5.95
5 Points | In Stock
Shop Organizer with Drawers Woodworking Plan

Keep hardware, supplies, and small hand tools at the ready in this easy-to-build drawer cabinet. We placed ours in the shop, but this handy design works well organizing craft-project supplies and othe...

From USD 5.95
5 Points | In Stock
Tablesaw Blade Locker Woodworking Plan

Build this compact storage unit and say good-bye to shuffling through blades stacked on a shelf or in a drawer. The pullout panels keep everything at your fingertips while protecting the carbide teeth...

From USD 5.95
5 Points | In Stock

Build this caddy from one sheet of plywood and a few dimensional lumber scraps. It holds a small compressor, hose, nailers, fasteners, and other accessories in one ready-to-roll unit. If you are tired...

From USD 7.95
6 Points | In Stock
Flip Up Sanding Disc Caddy Woodworking Plan

Tired of looking through boxes for just the right grit? This handy organizer is just the solution. Build it as shown or adjust the number of shelves for however many sanding grits you typically use.

From USD 2.95
2 Points | In Stock
Space-Saving Tool Cabinet Woodworking Plan.

Sliding doors and perforated hardboard add an additional layer of storage in a single, smart-looking unit. The tool storage cabinet has a row of three individual perforated hardboard panels in back, p...

From USD 2.95
2 Points | In Stock
Easy Attractive Drill Bit Cabinet Woodworking Plan

Here is a great way to keep everything you need for drilling tasks in one place. Putting a few extra dadoes in the side of the doors at the time of construction allows you to change the internal shelf...

From USD 2.95
2 Points | In Stock
Bench top Sanding-Disc Caddy Woodworking Plan

This bench top sanding disc caddy allows you to store, wrap, and tote your sanding needs with this single portable unit.

From USD 2.95
2 Points | In Stock
Resources & Free Plans

Since 1998, we have curated the Internet's largest online woodworking resources database.

Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.

Visit Resources & Free Plans

Banner Adverts
HALLOWEEN YARD ART WOODWORKING PATTERN
QUARANTINE AREA SIGNS - ZOMBIES
Maritime Bar Stool and Lifeguard Chair plans
HAPPY HALLOWEEN BONEYARD SIGN
Halloween Skeletons Yard Art Woodworking Plans
Card File Octagon Cabinet
Pirate Halloween Yard Art Woodworking Plywood Projects to Make
8ft Tall Sasquatch Yard Art Woodworking Pattern
Halloween Skull Plywood Projects DIY
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2021 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2021 Kryptronic, Inc. Exec Time: 0.229783 Seconds Memory Usage: 7.038239 Megabytes
Kryptronic