Tree Bench Woodworking Plan. Tree Bench Woodworking Plan. WOOD®Store With this comfy cedar bench wrapped around a tree, your backyard becomes a relaxing nature retreat. Build it in sections in your shop, and then install them easily outside. Designed to fit a 20 diameter tree (63 inches around). 31_MD_00612 31-MD-00612 14.95 WoodworkersWorkshop
Location

Tree Bench Woodworking Plan.

31-MD-00612 - Tree Bench Woodworking Plan.
With this comfy cedar bench wrapped around a tree, your backyard becomes a relaxing nature retreat. Build it in sections in your shop, and then install them easily outside. We ease the construction, with simple guides and spacers to make quick work when cutting the angles for the bench components. The bench shown fits around a tree up to 20 inches in diameter at the base (ground level) which is the same as 63 inches around. To accommodate a larger tree, we will show you what parts to lengthen.

Finished Dimensions
Height: 36.25 inches (90.625 cm)

Wood and Supplies needed:
We used cedar but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Tablesaw, drill press, bandsaw or jigsaw, clamps, router, drill, circular saw, mitersaw, hand tools.

Your Total:

31-MD-00612 - Tree Bench Woodworking Plan. Selection

31-MD-00612PAPER - Tree Bench Woodworking Plan. - Paper plan
USD 17.95 | 12 Points | In Stock
31-MD-00612PDF - Tree Bench Woodworking Plan. - PDF plan
USD 14.95 | 14 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Circular Tree Bench Woodworking Plan.

Eight countoured seats. Fits trees up to 2 feet in diameter, 18 inches high at the seat. The Tree Bench is a companion piece to the Garden Bench plan. There are few plans for tree benches and...

USD 17.95
17 Points | In Stock
Tree Bench Woodworking Plan.

With this comfy cedar bench wrapped around a tree, your backyard becomes a relaxing nature retreat. Build it in sections in your shop, and then install them easily outside. Designed to fit a 20 diameter tree (63 inches around).

From USD 14.95
14 Points | In Stock
Hall Tree Storage Bench Woodworking Plan.

Keep this combination coat rack and bench near your entry door, then say goodbye to soggy shoes on the carpet and jackets tossed over the backs of chairs. The lower cabinet provides a handy seat to ti...

From USD 9.95
9 Points | In Stock
Resources & Free Plans

Since 1998, we have curated the Internet's largest online woodworking resources database.

Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.

Visit Resources & Free Plans

Banner Adverts
Folding Chair plans
Bedroom Nightstand Plans
Loft Beds
Gun and Firearm Woodworking plans
Bathroom Vanity Plans
Bedroom Dresser Furniture Plans
Dining Table and Chair Furniture Plans
Kitchen Pantry Cupboard
Pony Coin Banks Woodworking Plans.
8ft Tall Sasquatch Yard Art Woodworking Pattern
Porch Swings
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2021 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2021 Kryptronic, Inc. Exec Time: 0.113019 Seconds Memory Usage: 2.529808 Megabytes
Kryptronic