3 Must Have Router Jig Woodworking Plan
Plan Author: Pat Warner, Patrick Speilman and Carol Reed
Plan Contributors: Carl Voss, Roxanne LeMoine
Published Date: 2004 November
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Tools needed:
Table saw, router, clamps are other common workshop tools.
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
You Might Also Like...
Make your own safety push sticks, push blocks, and feather boards. Push sticks help keep your fingers away from the table saw blade. Also useful for the jointer, shaper and router table.
Most jigs rely on a small cam to position the board, but do not provide enough support along the length of the board to prevent racking. Without proper alignment, the dovetails vary slightly in length...
A simple, no non-sense design. Given how specialized the tools are for pocket-hole joinery, some woodworkers have balked at using the technique for projects. Nowadays, the dedicated jigs for drilling ...
Do not grieve over sloppy router-cut dadoes. Instead, gear up for accuracy with this easy-to-make-and-use scrap wood problem solver.
This router jig is a specialist at through or stopped dadoes and grooves. Included is an exploded diagram.
This full-featured fence and a team of accessories make an unbeatable workshop combination. To add flexibility, the fence is designed to attach to a router table in just about every imaginable way. Af...
For this special issue on routers, we asked a trio of seasoned router experts to share shop-made jigs they have found super handy over the years. We will provide the plans for each, and also show how ...
Say goodbye to rough and irregular edges the next time you cut a circle or ring. And, using the extended base of the trammel for added stability, as shown at right, you can detail an edge or rabbet th...
Mount your router to this simple-to-build jig, and guide it arrow-straight down the workpiece to rout flutes with dead-on precision.
Here is a quick-and-easy Self Centering Mortising jig that can be used on stock of various thicknesses and will always self-center.
