Multi Tiered Drill-Driver Organizer Woodworking Plan.
Finished Dimensions
Height: 4 inches (10 cm)
Width: 11.5 inches (28.75 cm)
Depth: 4 inches (10 cm)
Wood and Supplies needed:
We used hardboard and solid stock, but you can use a wood of your choice.
Tools needed:
Tablesaw, drill.
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
You Might Also Like...
We designed this perforated hardboard tool storage system to help you stay organized in your workshop. The system consists of a framed hanging tool board sized to suit your needs and eight specialized...
This super organized project will provide plenty of room for all the bits you will need to drive a wide assortment of screws. Build the box, then apply the quick-reference chart to match the right bit...
When David Riel needed router-bit storage close at hand, he built this organizer and attached it to the side of his freestanding router table. Whether you attach it to your router table or to the wall...
Build the holder as shown or customize it to fit your tool needs. Either way, it keeps your lathe tools and accessories close at hand. Now, if only hollowing a bowl were this easy.
Want to keep large drill bits and other hold-boring accessories close at hand and easy to find? This compact carousel hold a multitude of specialty bits, such as holesaws and Forstner bits, and swivel...
With the look of a fine gun rack, this storage unit keeps long-handled turning tools in a secure horizontal display.
This quick-to-make project slides between the rails in the lathe bed (known as the ways) and cradles turning tools within arms reach. When not in use, it hangs on the wall out of the way. Feel free to...
Keep your power tools close at hand, but out of the way with these tilt-down tool storage boxes. A power strip mounted along the edge keeps tools plugged in and ready for service.
Sliding doors and perforated hardboard add an additional layer of storage in a single, smart-looking unit. The tool storage cabinet has a row of three individual perforated hardboard panels in back, p...
