Plant Stand Woodworking Plan Plant Stand Woodworking Plan WOOD®Store If you stumble over potted plants every time you step onto the porch or patio, you should build this sturdy stand to get that flora off the floor. And, it is pretty enough to bring inside along with t... 31_MD_00377 31-MD-00377 7.95 WoodworkersWorkshop

Plant Stand Woodworking Plan

31-MD-00377 - Plant Stand Woodworking Plan
If you stumble over potted plants every time you step onto the porch or patio, you should build this sturdy stand to get that flora off the floor. And, it is pretty enough to bring inside along with the plants for the winter.

Finished Dimensions
Height: 80 inches (203.2 cm)

Plan Author: James R. Downing

Published Date: 2000

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used cedar, but you can use wood of your choice.

Tools needed: Table saw, drill press, bandsaw, circular saw, and other common workshop tools

Your Total:

31-MD-00377 - Plant Stand Woodworking Plan Selection

31-MD-00377PAPER - Plant Stand Woodworking Plan - Paper plan
USD 10.95 | 10 Points | In Stock
31-MD-00377PDF - Plant Stand Woodworking Plan - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Mission Style Plant Stand Woodworking Pattern

This mission style small table is suitable was a side table or to be used as a pedestal for a potted plant. This simple assembly consist of 4 parts and can be made with as little a one piece of 1 x 10...

From USD 4.95
4 Points | In Stock
A Collection of Simple Plant Stands and Scrollsaw Woodworking Projects

A collection of easy to build planter boxes and plant stands. A great way to make use of scrap pieces of wood. Full size line art drawings.

From USD 7.95
8 Points | In Stock
Tiered Plant Stand Woodworking Plan

This multi-purpose plant stand can be utilised in a corner, against a wall (make two), or as a four-piece stand-alone plant display centre. Plants in pots are shown on four levels. It can be used both indoors and out on the patio. 1x12 lumber was used for this project.

USD 16.99
16 Points | In Stock
Multi-Level Plant Stand Woodworking Plan.

3/4 inch thick and 2x2 inch stock can be used to make a lovely floral plant stand to enhance your home or patio. Plants and flowers with pot bases up to 7 inches in diameter can be supported by multi-level bloom platforms.

USD 14.99
14 Points | In Stock
Puppy Plant Stand Woodworking Plan.

The base of this plant stand is made up of three cute puppies. Each puppy is in a unique but endearing position. This is a simple craft that can be made out of 3/4 inch thick timber. All of the patterns are drawn full size in their entirety. The top is 12 inches in diameter and is 6-1/4 inches tall.

USD 12.99
12 Points | In Stock
Moose Plant Stand Woodworking Plan.

Three majestic moose create the base for this attractive plant stand. The large 11 inch diameter top will accommodate even larger flower pots. Simple construction from 3/4 inch thick pine and 7/16 inch thick for the antlers. All patterns drawn FULL SIZE. The moose stand is 11-1/2 inches high.

USD 12.99
12 Points | In Stock
Flower Pot Hippo Woodworking Plan.

Make this friendly hippopotamus for your garden. Easy to make from 3/4 inch thick lumber.

USD 15.99
15 Points | In Stock
Tricycle Planter Woodworking Plan.

Make this lovely flower cart for your yard. We designed it so you can cut all the parts from 1x12 boards - ­no edge gluing required!

USD 16.99
16 Points | In Stock
Panel and Frame Pedestal Woodworking Plan.

Traditionally styled, yet simple to construct, this sensational oak support will serve as a fitting display for even your best sculpture or carving.

From USD 7.95
7 Points | In Stock
Plant Stand Woodworking Plan

If you stumble over potted plants every time you step onto the porch or patio, you should build this sturdy stand to get that flora off the floor. And, it is pretty enough to bring inside along with t...

From USD 7.95
7 Points | In Stock
Resources & Free Plans

Since 1998, we have curated the Internet's largest online woodworking resources database.

Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.

Visit Resources & Free Plans

Banner Adverts
Maritime Bar Stool and Lifeguard Chair plans
Momma Sasquatch and Littlefoot Yard Art Woodworking Pattern
Card File Octagon Cabinet
Infant Rocking Horse
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2022 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2022 Kryptronic, Inc. Exec Time: 0.231553 Seconds Memory Usage: 6.900253 Megabytes
Kryptronic