Flight of Fancy Box Woodworking Plan
Plan Author: Russell Greenslade
Published Date: 2000
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Wood and/or Supplies needed: We used exotic wood, but you can use any contrasting wood of your choice.
Tools needed: Bandsaw or scroll saw, router, drill and other common workshop tools
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
You Might Also Like...
If you have a piece of plywood approximately 24 x 36 inches, you can make this project. Shown here made with 3/8 inch thick plywood. I used the scrollsaw for cutting the outlines and used the bandsaw ...
Tool around with your bandsaw or scrollsaw and make yourself a simply hinged lid box. Cut it out from scrap wood you probably have in your workshop. Beginner skill level.
With the smallest of wood pieces you could make this little box to store trinkets or gifts. Cut it out from scrap wood you probably have in your workshop. Beginner skill level.
With the smallest of wood pieces you could make this little stand to rest your calculator or phone at just the right angle for viewing at a glance while working at your desk. Cut it out from scrap woo...
Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. We are pretty sure once you see just how easy it is to make a band saw box, you will be making more. A basic 1 page ins...
Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. We are pretty sure once you see just how easy it is to make one of these trinket boxes, you will be making one and then...
Sawbuck projects! Build from the smallest scrap wood you probably have in your workshop and sell for a couple bucks at craft shows. A basic 1 page instruction on how to make one, with full size drawin...
Sawbuck projects! Build from the smallest scrap wood you probably have in your workshop and sell for a buck unpainted at craft shows. A basic 1 page instruction on how to make one, with full size draw...
Sawbucks projects! Using the smallest of scrap wood pieces. Bandsawn boxes are fun to create, are excellent gifts and may be very profitable. This design shows the basic technique for creating these e...
Sawbucks projects! Using the smallest of scrap wood pieces. This playing card box can be made to hold one or two decks. Most decks are 2-1/4 inches wide but check your cards before starting. Beginner ...
