Height: 11 inches (27.9 cm)
Width: 11.5 inches (29.2 cm)
Depth: 5 inches (12.7 cm)
Plan Author: James R. Downing
Plan Contributors: Jan Svec, Chuck Hedlund
Published Date: 2000
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Wood and/or Supplies needed: We used wenge and birch, but you can use contrasting woods of your choice.
Tools needed: Table saw, drill press, planer,router, and other common workshop tools
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
This mission style small table is suitable was a side table or to be used as a pedestal for a potted plant. This simple assembly consist of 4 parts and can be made with as little a one piece of 1 x 10...
Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. A unique way to display test tubes of plant cuttings. Beginner skill level.
A collection of easy to build planter boxes and plant stands. A great way to make use of scrap pieces of wood. Full size line art drawings.
This multi-purpose plant stand can be utilised in a corner, against a wall (make two), or as a four-piece stand-alone plant display centre. Plants in pots are shown on four levels. It can be used both indoors and out on the patio. 1x12 lumber was used for this project.
3/4 inch thick and 2x2 inch stock can be used to make a lovely floral plant stand to enhance your home or patio. Plants and flowers with pot bases up to 7 inches in diameter can be supported by multi-level bloom platforms.
The base of this plant stand is made up of three cute puppies. Each puppy is in a unique but endearing position. This is a simple craft that can be made out of 3/4 inch thick timber. All of the patterns are drawn full size in their entirety. The top is 12 inches in diameter and is 6-1/4 inches tall.
Three majestic moose create the base for this attractive plant stand. The large 11 inch diameter top will accommodate even larger flower pots. Simple construction from 3/4 inch thick pine and 7/16 inch thick for the antlers. All patterns drawn FULL SIZE. The moose stand is 11-1/2 inches high.
Make this friendly hippopotamus for your garden. Easy to make from 3/4 inch thick lumber.
Make this lovely flower cart for your yard. We designed it so you can cut all the parts from 1x12 boards - no edge gluing required!
A plant stand supported by two friendly bears. Make this project from 1x8 inch lumber. It measures 24 inches long and 9 inches high.
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.