Arts and Crafts Table Lamp Woodworking Plan. Arts and Crafts Table Lamp Woodworking Plan. WOOD®Store Mica panels in a wooden framework, accented with copper pine-cone motifs, make this a lamp that gets noticed. You will be surprised at how easy it is to cut and assemble the half laps in the lampshade... 31_MD_00264 31-MD-00264 7.95 WoodworkersWorkshop

Arts and Crafts Table Lamp Woodworking Plan.

31-MD-00264 - Arts and Crafts Table Lamp Woodworking Plan.
Mica panels in a wooden framework, accented with copper pine-cone motifs, make this a lamp that gets noticed. You will be surprised at how easy it is to cut and assemble the half laps in the lampshades streamlined framework.

Wood and Supplies needed:
We used oak but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Tablesaw, drill, clamps, thickness planer, table mounted router, bandsaw, drill press.

Your Total:

31-MD-00264 - Arts and Crafts Table Lamp Woodworking Plan. Selection

31-MD-00264PAPER - Arts and Crafts Table Lamp Woodworking Plan. - Paper plan
USD 10.95 | 10 Points | In Stock
31-MD-00264PDF - Arts and Crafts Table Lamp Woodworking Plan. - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Bookshelf Clamp Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap plywood you probably have in your workshop and sell for a buck at craft shows. A basic 1 page instruction on how to make one with full size drawings. Beginner s...

From USD 2.95
1 Point | In Stock
Assorted Lamps Collection Woodworking Pattern

A wide variety of wood lamps, easy to build. A great way to make use of scrap pieces of wood. Full size line art drawings.

From USD 7.95
8 Points | In Stock
Table Lamp Woodworking Plan.

This table lamp uses a three wire socket. This socket allows the use of a standard light bulb on top and controls a small lamp placed inside the wood base. Light form the small lamp shines through the hearts cut out of the base. A handy drawer holds small items.

USD 11.99
11 Points | In Stock
Display Lamp Woodworking Plan.

Glass panels in two sides and the door allows you a perfect place to display your favourite collectibles. Leave out the glass shelf to display larger objects.

USD 16.99
16 Points | In Stock
Light Up Lamp Post Plaque Woodworking Plan.

The delicate light from the frosted tip bulb reminds us of an age old gas light. Holly leaves are cut out from 1/2 inch thick wood and the berries were made using pre-drilled wood balls attached with dowels. The post is assembled using four strips of 3/4 inch thick lumber. This leaves a hollow centre for the cord.

USD 16.99
16 Points | In Stock
Cedar Lamp Post Woodworking Plan.

This cedar lamp post has a lift out bar so you can easily change banners for any occasion. Designed to be used with low voltage landscape lighting. Additional lamp tops can be made to provide matching cedar housings for the remaining low voltage lights in the set.

USD 16.95
16 Points | In Stock
Shaker Drawer Lamp Woodworking Plan

This lamp has four workable drawers for sorting pens, pencils and notepads. The drawers feature extended slides so the drawer can be pulled out to access the entire drawer compartment.

USD 11.99
11 Points | In Stock
Lamp Post Snowman Woodworking Plan.

Grab some 1x8 lumber and a piece of 2x12 to build this awesome porch display! A sensational snowman decoration. A flame tip light bulb can be used to make the old fashion lantern look complete.

USD 14.99
14 Points | In Stock
Golf Display Lamp Woodworking Plan

Hinged door provides easy access. Lamp base is shaped like a putting green. Bracket holds putter on side of project as pictured for quick practice putts. Target your ball toward the recess in the base. Cabinet stands 48-1/2 inches tall.

USD 14.99
14 Points | In Stock
Boat Shelf Lamp Woodworking Plan

Perfect for both nautical and cabin style decorating. This project has four shelves so you can stow away your own nautical gear. This project can also be built without lamp and used as a wall shelf. The boat itself measures 23 inches high.

USD 10.99
10 Points | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
Potting Bench Woodworking Plan.
Rowing Home Woodworking Plan -part of a 17 pattern package
Turned Writing Pens Woodworking Plan
Mission Style Baby High Chair Woodworking Plan
First Toys Collection - all 28 vehicle woodworking plans included.
Sasquatch Family Yard Art Woodworking Pattern
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.048977 Seconds Memory Usage: 1.60453 Megabytes
Kryptronic