WOOD®Store
Looking for a project to test your skills in joinery? This magazine rack features a center-lap joint that not only crosses at an oblique angle, but is tapered to boot! It begs to be cut by hand, and ...
31_MD_00236
31-MD-00236
5.95
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/31_MD_00236
Finished Dimensions
Height: 11 inches (27.9 cm)
Plan Author: Jay Taylor
Plan Contributors: Marlen Kemmet, Roxanne LeMoine, Kim Downing, Jamie Downing, Bill Zaun
Published Date: 2002
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Wood and/or Supplies needed: We used oak, but you can use a wood of your choice. A full cutting diagram and materials list is included with the plan.
1 of 3/4 x 3-1/2 x 96 inch oak lumber
1 of 1/2 x 5-1/2 x 72 inch oak lumber
1 of 1/2 x 7-1/4 x 36 inch oak lumber
Tools needed: Table saw, band saw, belt sander, drill, router and other common workshop tools.
A basic build table that can make use of scrap wood boards or recycled pallet pieces.
This project does require an angle cut, some curve cutting of the decorative scrolls and some fairly accurate drilling.
This attractive country style basket rack could be mounted to any flat surface or make two and place them back to back of each other. An excellent tool tote in the garden too. This project does require...
This is a nice design that may be made with good workmanship and a nice finish for personal use or bang them out with glue, finish nails and a coat of stain for inexpensive products to sell.
We really enjoy this simple design because it may be made shorter or longer, narrower or wider without taking up any more floor space.. Formerly called Wall Magazine Rack.
Each of the six shelves can accommodate nearly 20 magazines! Multiple shelves make it simple to keep periodicals and books organised. Removes the issue of missing or lost magazines. 1x12 inch boards make for a simple build.
With a little scrollsawing, some simple contour sanding, and our easy-to-follow instructions, you can transform a few scraps of wood into this heavenly wall hanging by renowned artist Judy Gale Robert...
We show you how to resaw boards into thinner slabs using a bandsaw. We point out five good reasons to resaw your own lumber. We show you all the tips to tightly tune your bandsaw, including setting up...
Talk about luck! When I was researching the article on furniture maker Thomas Moser for the August 1998 issue, I casually mentioned to him that we are always looking for great project designs. To my s...
This unique jewelry box features a striking copper lid with a patina pattern that you can easily duplicate with our instructions. The removable tray and system of interior dividers multiply the storage...
