Location
Home / Store / Workbenches & Jigs / Bandsaw Table System Plus 3 Jigs Woodworking Plan

Bandsaw Table System Plus 3 Jigs Woodworking Plan

Looking to take your bandsaw to a whole new level of performance and versatility? Here is your chance. After you build the table, construct the jigs included with the plan, and then see our section -Put Your Bandsaw to Work- starting on page 19 for tips on putting the system to work in your shop. The three jigs included are: tapering jig, duplicating jig, and feather board/single-point fence.

Plan Author: Jeff Mertz

Plan Contributors: Marlen Kemmet, Roxanne LeMoine, Lorna Johnson, Owen Duvall

Published Date: 2003

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used birch plywood, maple and tempered hardboard, but you can use a wood of your choice.

Tools needed: Table saw, router, jigsaw, bandsaw, hacksaw, and common hand tools.

Your Total:

Options

Bandsaw Table System Plus 3 Jigs Woodworking Plan - Paper plan
Item: 31-MD-00232PAPER
USD 8.95 | 8 Points | In Stock
Bandsaw Table System Plus 3 Jigs Woodworking Plan - PDF plan
Item: 31-MD-00232PDF
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

Tracing Paper 19x51inch, 1 sheet
Item: 05-TRACEPAPER-1
USD 3.95 | In Stock
Tracing Paper 19x51inch, 5 sheets
Item: 05-TRACEPAPER-5
USD 7.95 | In Stock
About

The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.

Copyright Statement

You Might Also Like...

3D Moose Head Woodworking Pattern

If you have a piece of plywood approximately 24 x 36 inches, you can make this project. Shown here made with 3/8 inch thick plywood. I used the scrollsaw for cutting the outlines and used the bandsaw ...

From USD 2.95
2+ Points | In Stock
Hinged Lid Bandsaw Box Downloadable Scrollsaw Woodworking Pattern

Tool around with your bandsaw or scrollsaw and make yourself a simply hinged lid box. Cut it out from scrap wood you probably have in your workshop. Beginner skill level.

From USD 2.95
2 Points | In Stock
Bandsaw Box with Lid Downloadable Scrollsaw Woodworking Pattern

With the smallest of wood pieces you could make this little box to store trinkets or gifts. Cut it out from scrap wood you probably have in your workshop. Beginner skill level.

From USD 2.95
2 Points | In Stock
Calculator Stand Downloadable Scrollsaw Woodworking Pattern

With the smallest of wood pieces you could make this little stand to rest your calculator or phone at just the right angle for viewing at a glance while working at your desk. Cut it out from scrap woo...

From USD 2.95
2 Points | In Stock
2 Drawer Bandsaw Box Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. We are pretty sure once you see just how easy it is to make a band saw box, you will be making more. A basic 1 page ins...

From USD 2.95
1+ Point | In Stock
Whatnot Box Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. We are pretty sure once you see just how easy it is to make one of these trinket boxes, you will be making one and then...

From USD 2.95
1+ Point | In Stock
Simple Ring Box Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Build from the smallest scrap wood you probably have in your workshop and sell for a couple bucks at craft shows. A basic 1 page instruction on how to make one, with full size drawin...

From USD 2.95
1+ Point | In Stock
Bowling Pinman Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Build from the smallest scrap wood you probably have in your workshop and sell for a buck unpainted at craft shows. A basic 1 page instruction on how to make one, with full size draw...

From USD 2.95
2 Points | In Stock
Bandsaw Boxes Downloadable Scrollsaw Woodworking Patterns

Sawbucks projects! Using the smallest of scrap wood pieces. Bandsawn boxes are fun to create, are excellent gifts and may be very profitable. This design shows the basic technique for creating these e...

From USD 2.95
1+ Point | In Stock
Card Deck Wood Box Downloadable Scrollsaw Woodworking Patterns

Sawbucks projects! Using the smallest of scrap wood pieces. This playing card box can be made to hold one or two decks. Most decks are 2-1/4 inches wide but check your cards before starting. Beginner ...

From USD 2.95
1+ Point | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
Kneeling Soldier at Fallen Soldiers Cross Yard Art Silhouette Pattern
Maritime Maple Leaf Chair Woodworking Plan
Folding Bench Picnic Table Woodworking Plan with Full Size Templates
Sasquatch Family Yard Art Woodworking Pattern
Yard Art Wind Mobiles Woodworking Plans and Projects
Your Free Woodworking Plans and Projects Search Engine Since 1998
WoodworkersWorkshop
Your Cart
Your Cart: Empty
© 1998-2025 WoodworkersWorkshop, all rights reserved worldwide.
Kryptronic eCommerce, Copyright 1999-2025 Kryptronic, Inc. - https://kryptronic.com/ [0.046991 / 1.88385]