Height: 12 inches (30 cm)
Wood and Supplies needed:
We used oak and oak plywood, but you can use a wood of your choice. A full materials and supplies list is included with the plan.
Table saw, band saw or scrollsaw, router, drill press, scrollsaw, drum or spindle sander, clamps.
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
A basic build table that can make use of scrap wood boards or recycled pallet pieces.
This project does require an angle cut, some curve cutting of the decorative scrolls and some fairly accurate drilling.
This attractive country style basket rack could be mounted to any flat surface or make two and place them back to back of each other. An excellent tool tote in the garden too. This project does require...
This is a nice design that may be made with good workmanship and a nice finish for personal use or bang them out with glue, finish nails and a coat of stain for inexpensive products to sell.
We really enjoy this simple design because it may be made shorter or longer, narrower or wider without taking up any more floor space.. Formerly called Wall Magazine Rack.
Each of the six shelves can accommodate nearly 20 magazines! Multiple shelves make it simple to keep periodicals and books organised. Removes the issue of missing or lost magazines. 1x12 inch boards make for a simple build.
Every time we visit the shop of a well-seasoned woodworker, we come away with fresh ideas for solving common workshop challenges. These ideas typically take the form of special jigs, storage projects,...
Looking for a project to test your skills in joinery? This magazine rack features a center-lap joint that not only crosses at an oblique angle, but is tapered to boot! It begs to be cut by hand, and ...
Do you keep back issues of WOOD magazine for reference? To house both the past issues of WOOD magazine and the newly upsized version, build these handsome and handy magazine file boxes. These boxes ...
This table has a dual personality. Parked beside your sofa, its concealed casters let it masquerade as an end table with a magazine rack. Wheel it around front, cantilever it over the cushions, and it...
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.