WOOD®Store
Downloadable plan available. It is sad but true that the space beneath most tablesaws goes to waste. But that need not be the case, as you can see here. Our cabinet stores a plentiful supply of sawblades, router bits, and other w...
31_MD_00082
31-MD-00082
6.48
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/31_MD_00082
Wood and Supplies needed:
We used birch plywood, maple hardboard and fir, but you can use a wood of your choice. A full materials and supplies list is included with the plan.
Tools needed:
Table saw, clamps, router, drill, and common hand tools.
Attention all tablesaw owners! Now is your chance to make some big improvements in your equipment for just a few dollars. By investing as few as a couple of evenings, you can enclose the base, add an ...
Downloadable plan available. It is sad but true that the space beneath most tablesaws goes to waste. But that need not be the case, as you can see here. Our cabinet stores a plentiful supply of sawblades, router bits, and other w...
Our handy folding fixture adds only inches to your saw when stored, but provides you with more than 3 feet of stock support beyond the blade for safer and more convenient cutting. This fixture attache...
Savvy storage within easy reach. Extension tables for tablesaws make woodworking easier, but they sure eat up a lot of precious floor space. This handsome roll-away cabinet helps you put that valuable...
Clear the air in your workshop with these easy-to-make projects. The less dust floating around in your workshop, the better. Not only does your shop stay cleaner, but, more importantly, your lungs...
Box joints offer both strength and unique good looks. Although not as refined as dovetail joints, they can be cut on a table saw or router table using a simple shop-built jig. Not only that, but you ...
Taper jigs do not get much more basic than this hold-down taper jig. Build the plywood base and hardwood hold downs. Then, mark the angled cut line(s) on your workpiece. Position the rip fence so the ...
A built-in dust chute links it directly to your shop vacuum or dust collector. We designed this sanding table to fit a 10 inch Jet Contractors Saw. You will probably have to alter the tables size to...
Ripping table legs or other project pieces at an angle can be frustrating and even dangerous work. However, with our taper jig, you will be able to quickly set the precise angle and safely cut leg aft...
Increase the capacity of your tablesaw and router by combining them in one accommodating twin-cabinet design. The advantages include a larger tabletop, ample onboard accessory storage, and dedicated...
