Location
Home / Store / Workbenches & Jigs / Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2.

Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2.

We showed you how to make the end cabinets and the sturdy laminated top for the workbench, in Part 1, the Full-Service Workbench, 31-MD-00058 sold separately. Now, with the basics out of the way, lets add a pair of cabinets-one with a lift-up router table and another with a flip-over top that accommodates a benchtop power tool. To access a tool, simply open the cabinet doors, tap the foot pedal, pull up the table, and lock it in place. With the cabinet having the flip-over top, you will also need to swivel it 180 degrees and then lock it in place. Each measures approximately 36 inches tall, and 23 inches deep.

Finished Dimensions
Height: 36 inches (90 cm)
Depth: 23 inches (57.5 cm)

Wood and Supplies needed:
We used medium density fiberboard (MDF) and hardwood, but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, router, drill, clamps, and common hand tools.

Your Total:

Options

Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2. - Paper plan
Item: 31-MD-00059PAPER
USD 12.95 | 12 Points | In Stock
Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2. - PDF plan
Item: 31-MD-00059PDF
USD 9.95 | 9 Points | In Stock

Tracing Paper Options

Tracing Paper 19x51inch, 1 sheet
Item: 05-TRACEPAPER-1
USD 3.95 | In Stock
Tracing Paper 19x51inch, 5 sheets
Item: 05-TRACEPAPER-5
USD 7.95 | In Stock
About

The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.

Copyright Statement

You Might Also Like...

Router Table Woodworking Plan.

This low cost, easy to build router table has all the best features including universal router insert, fully positionable fence, clear view safe guard areas for both controlled and free hand routing, a mitre slot gauge, router bit holder and vacuum hose connection.

USD 21.99
21 Points | In Stock
Push Sticks Woodworking Plan.

Make your own safety push sticks, push blocks, and feather boards. Push sticks help keep your fingers away from the table saw blade. Also useful for the jointer, shaper and router table.

USD 14.99
14 Points | In Stock
Router Bit Storage Cabinet Woodworking Plan

Using inexpensive MDF, hardboard and pine material, you can create a cabinet that offers great storage for router bits, bushings, wrenches, safety gear and anything else you use with your router. The ...

USD 9.99 USD 5.00 (Save 50%)
9 Points | 2 In Stock
Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2.

We showed you how to make the end cabinets and the sturdy laminated top for the workbench, in Part 1, the Full-Service Workbench, 31-MD-00058 sold separately. Now, with the basics out of the way, lets...

From USD 9.95
9+ Points | In Stock
Tilt Top Router Table Woodworking Plan

An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up f...

USD 12.95 USD 6.48 (Save 50%)
12 Points | 3 In Stock
Benchtop Router Table Woodworking Plan

This project is a must in your shop and you can put it together in a weekend for less than $100 plus the cost of your own wood. Its fence adjusts in a flash and locks into T-slotted mini-tracks with t...

USD 12.95 USD 6.48 (Save 50%)
12 Points | 1 In Stock
Dovetail Jig Stabilizing Fence Woodworking Plan

Most jigs rely on a small cam to position the board, but do not provide enough support along the length of the board to prevent racking. Without proper alignment, the dovetails vary slightly in length...

5 Points | 4 In Stock
Pocket Hole Routing Jig Woodworking Plan

A simple, no non-sense design. Given how specialized the tools are for pocket-hole joinery, some woodworkers have balked at using the technique for projects. Nowadays, the dedicated jigs for drilling ...

5 Points | 4 In Stock
Right On Dadoe Jig Woodworking Plan.

Do not grieve over sloppy router-cut dadoes. Instead, gear up for accuracy with this easy-to-make-and-use scrap wood problem solver.

From USD 5.95
5+ Points | In Stock
Fail Safe Router Jig Woodworking Plan

This router jig is a specialist at through or stopped dadoes and grooves. Included is an exploded diagram.

5 Points | 5 In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
Kneeling Soldier at Fallen Soldiers Cross Yard Art Silhouette Pattern
Maritime Maple Leaf Chair Woodworking Plan
Folding Bench Picnic Table Woodworking Plan with Full Size Templates
Sasquatch Family Yard Art Woodworking Pattern
Yard Art Wind Mobiles Woodworking Plans and Projects
Your Free Woodworking Plans and Projects Search Engine Since 1998
WoodworkersWorkshop
Your Cart
Your Cart: Empty
© 1998-2025 WoodworkersWorkshop, all rights reserved worldwide.
Kryptronic eCommerce, Copyright 1999-2025 Kryptronic, Inc. - https://kryptronic.com/ [0.043911 / 1.747231]