3 in 1 Tablesaw Upgrade and Saw Top Dust Collector Woodworking Plan Set.
Wood and Supplies needed:
We used MDF, hardboard (maple or birch), and plywood, but you can use a wood of your choice. A full materials and supplies list is included with the plan.
Tools needed:
Table saw, router, drill, clamps, common hand tools.
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
You Might Also Like...
Attention all tablesaw owners! Now is your chance to make some big improvements in your equipment for just a few dollars. By investing as few as a couple of evenings, you can enclose the base, add an ...
In designing and outfitting WOOD Magazines Idea Shop 3 basement shop with a cyclone dust collector, we had several objectives in mind. We wanted a space-efficient unit with minimal noise, dust-free...
This table saw dust-collector hood is effective as well as convenient. The big window lets you see your cut at all times, and neither the hood nor its support will impede your sawing. Included is a bo...
Clear the air in your workshop with these easy-to-make projects. The less dust floating around in your workshop, the better. Not only does your shop stay cleaner, but, more importantly, your lungs...
A built-in dust chute links it directly to your shop vacuum or dust collector. We designed this sanding table to fit a 10 inch Jet Contractors Saw. You will probably have to alter the tables size to...
Clamp it to your workbench or drill press and you have the perfect cleaner-upper. Or, set it on the floor and sweep in the debris for easy pick up.
Airborne debris does not stand a chance with this device. Wood chips and sawdust will not stay around long when you hook up this clamp-down collector to your shop vacuum or dust collection system.
This handy table helps you in three important ways. First, it has a dust-collection port for capturing fine dust before it becomes airborne. The table also accepts inserts that you size to tightly fit...
When you are template or freehand routing, a fence-mounted dust port does no good. So for those situations, Todd DiOrio of Pennsylvania designed this dust hood. Todd says, It can be mounted anywhere o...
You only need to run a flex hose from a 4 inch side port to the tool creating all that dust, whether its on the stand itself or if its already set up somewhere in your shop. A debris separator, effect...
