Arts and Crafts Lamp Woodworking Plan. Arts and Crafts Lamp Woodworking Plan. WOOD®Store Our Mission-style lamp features a low-wattage bulb in the lantern base that casts a warm glow through the stained glass. And, the practical reading height of the lamp makes it every bit as functional ... 31_MD_00045 31-MD-00045 7.95 WoodworkersWorkshop
Location
Home / Mission Furniture Collection / Arts and Crafts Lamp Woodworking Plan.

Arts and Crafts Lamp Woodworking Plan.

31-MD-00045 - Arts and Crafts Lamp Woodworking Plan.
Our Mission-style lamp features a low-wattage bulb in the lantern base that casts a warm glow through the stained glass. And, the practical reading height of the lamp makes it every bit as functional as it is handsome. Measurements are without lampshade.

Finished Dimensions
Height: 13.5 inches (33.75 cm)
Width: 7 3/8 inches (17.5 cm)
Depth: 7 3/8 inches (17.5 cm)

Wood and Supplies needed:
We used oak but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, clamps, router, plane, drill press, and common hand tools.

Supplies that we sell to assist you with this product:

The Buyers Guide in this plan mentions you can purchase a Lamp Parts Kit (source provided in the plan).

Your Total:

31-MD-00045 - Arts and Crafts Lamp Woodworking Plan. Selection

31-MD-00045PAPER - Arts and Crafts Lamp Woodworking Plan. - Paper plan
USD 10.95 | 10 Points | In Stock
31-MD-00045PDF - Arts and Crafts Lamp Woodworking Plan. - PDF plan
USD 7.95 | 7 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Bookshelf Clamp Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap plywood you probably have in your workshop and sell for a buck at craft shows. A basic 1 page instruction on how to make one with full size drawings. Beginner s...

From USD 2.95
1 Point | In Stock
Assorted Lamps Collection Woodworking Pattern

A wide variety of wood lamps, easy to build. A great way to make use of scrap pieces of wood. Full size line art drawings.

From USD 7.95
8 Points | In Stock
Table Lamp Woodworking Plan.

This table lamp uses a three wire socket. This socket allows the use of a standard light bulb on top and controls a small lamp placed inside the wood base. Light form the small lamp shines through the hearts cut out of the base. A handy drawer holds small items.

USD 11.99
11 Points | In Stock
Display Lamp Woodworking Plan.

Glass panels in two sides and the door allows you a perfect place to display your favourite collectibles. Leave out the glass shelf to display larger objects.

USD 16.99
16 Points | In Stock
Light Up Lamp Post Plaque Woodworking Plan.

The delicate light from the frosted tip bulb reminds us of an age old gas light. Holly leaves are cut out from 1/2 inch thick wood and the berries were made using pre-drilled wood balls attached with dowels. The post is assembled using four strips of 3/4 inch thick lumber. This leaves a hollow centre for the cord.

USD 16.99
16 Points | In Stock
Cedar Lamp Post Woodworking Plan.

This cedar lamp post has a lift out bar so you can easily change banners for any occasion. Designed to be used with low voltage landscape lighting. Additional lamp tops can be made to provide matching cedar housings for the remaining low voltage lights in the set.

USD 16.95
16 Points | In Stock
Shaker Drawer Lamp Woodworking Plan

This lamp has four workable drawers for sorting pens, pencils and notepads. The drawers feature extended slides so the drawer can be pulled out to access the entire drawer compartment.

USD 11.99
11 Points | In Stock
Lamp Post Snowman Woodworking Plan.

Grab some 1x8 lumber and a piece of 2x12 to build this awesome porch display! A sensational snowman decoration. A flame tip light bulb can be used to make the old fashion lantern look complete.

USD 14.99
14 Points | In Stock
Golf Display Lamp Woodworking Plan

Hinged door provides easy access. Lamp base is shaped like a putting green. Bracket holds putter on side of project as pictured for quick practice putts. Target your ball toward the recess in the base. Cabinet stands 48-1/2 inches tall.

USD 14.99
14 Points | In Stock
Boat Shelf Lamp Woodworking Plan

Perfect for both nautical and cabin style decorating. This project has four shelves so you can stow away your own nautical gear. This project can also be built without lamp and used as a wall shelf. The boat itself measures 23 inches high.

USD 10.99
10 Points | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
4 Board Table Top Reindeer Scrollsaw Project
Mary Joseph Baby Jesus and Sheep Nativity Yard Art Woodworking Pattern.
Grinch Christmas Gifts in the Bag! Yard Art Woodworking Pattern
Nativity Scene - Angel Yard Art Project
Santa Camo-Claus Kneeling Yard Art Woodworking Plan
Nutcracker 8 ft tall Yard Art Woodworking Pattern
Santa Claus and Rudolph Yard Art Woodworking Pattern
Sasquatch Family Yard Art Woodworking Pattern
Santa Claus with Camouflage Kneeling Yard Art Woodworking Plan
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.047357 Seconds Memory Usage: 1.603775 Megabytes
Kryptronic