Height: 17 inches (42.5 cm)
Width: 48 inches (120 cm)
Depth: 24 inches (60 cm)
Wood and Supplies needed:
We used cherry for our table but you can use a wood of your choice. A full list of materials and supplies is included in the plan.
Lathe, table saw, band saw, clamps, router, and common hand tools.
The #31 series plans (plans that start with 31- ) are available in either paper or PDF download. This is a project plan that you can download immediately after your purchase. If you want the paper plan mailed to you, choose that option instead. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and delivery time! This project plan has full color pages with scaled templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guidelines included.
This delicate mahogany and maple cabinet is a miniature treasure box for precious things. The knife hinges allow the door to open 120 degrees past the case sides. Rare earth magnets in the door and ...
This boat shelf is the perfect size for displaying your nautical decorations. It is small enough to hang on a wall yet large enough to stand alone on a table or shelf.
This curious cat has found a tasty snack and pulled it out from the trash!
Is there one wall cabinet that meets all needs? If so, you may be looking at it. We designed this one with a cove top, halogen lights, and towel bar so it fits right into a kitchen or bathroom. But, l...
Put your treasures on display with this perfect pair. The table incorporates mortise-and-tenon joinery for life-long joinery. The hall table measures 42.5 inches wide by 11.5 inches deep by 34 inches ...
With its adjustable framed-glass shelves and open sides, this easy-to-build display case will let your collectibles really shine. But you will not have to collect a shopful of tools to build it. This ...
Though it may appear to be one cabinet, this collectible showcase is actually two identical, stacked units. So once you set up to cut the pieces for the bottom unit, simply cut a second set of identic...
You can have this handsome hutch built in just a couple of weekends. You will need one four-foot by eight-foot sheet of veneer plywood for the back and door panels. This is a vintage project plan.
This is a vintage woodworking plan. Visit our FAQ page for a full definition. With large shelves and plenty of glass area, this curio cabinet will allow you to proudly display your finest curios and china.
This is a vintage woodworking plan. Visit our FAQ page for a full definition. This lovely cabinet will display a collection of st...
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.