This boot bench plan includes:
Page 1: Contents page and Disclaimer
Page 2: Introduction and a bit about the wood dimensions
Page 3: Plan drawing - Looking down view and side view
Page 4: Plan drawing front view and Individual pieces part 1
Page 5: Individual pieces part 2
Page 6: Parts identification and description
Page 7: Instructions. Step 1 - 4
Page 8: Instructions. Step 4 - 8
Page 9: Instructions. Step 9 - 12
Page 10: Instructions. Step 13 - 16
Page 11: Instructions. Step 17 - 20
Page 12: Instructions. Step 21 - 22 and photos
Page 13: More photos, Disclaimer
Tools needed:
Circular power saw, jig-saw, drill. Mind you, a chop saw would be handy too, plus common shop tools.
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Published Date: 2009
This pine bench is decorated with heart and wheat cut outs. As an option you could leave that out or pattern your own design. The bench is 36 inches long. The narrow design is ideal for a hall or entryway. The seat is hinged to allow for storage underneath.
Do shoes and boots seem to collect in your entryway? This bench not only provides you a place to sit while putting on or off your footwear but it also offers plenty of storage as well. The front panel tilts open to reveal a large storage area.
Features a built-in chair so you can sit down and take off your shoes or boots. Decorative coat hooks let you hang up your coat and hat. Handy mirror so you can make sure you are looking your best. Compact design takes up very little floor space in hall or entryway.
A practical bench for your entryway or mud room. Unique design better accommodates boots and shoes. Made primarily from 3/4 inch thick lumber. Pictured in pine. All patterns are drawn to full size.
Build this sturdy Shaker Bench with shoe storage in only a weekend. This project is part of our Basic Built series. In this plan you will also learn how to plug and hide screw holes. If you plan to st...