Location

Giant Garden Wishing Well Woodworking Plan

This wooden wishing well is relatively easy to construct using common size lumber and will be the feature in any garden or yard. The wishing well is almost 900mm (3ft)in diameter and stands almost 2400mm (8ft) high. Most of the well is constructed out of surfaced (dressed) 100x50 (2x4) lumber. The exceptions are the roof boards which are from 150x25mm (1x6inch) stock, and the spindle/handle and washers/handle arm which are from 25x25mm (1x1inch) and 100x25mm (1x4inch) stock respectively. The diameter and height of the well can easily be changed if so required. The diameter (well width) can made bigger or smaller by simply adding or subtracting the number of palings (vertical wall members) around the cylindrical base. The height can be altered by making the two extended palings (roof supports) either longer or shorter.

This wishing well building plan includes:
Page 1: Contents.
Page 2: Introduction.
Page 3: Plan - front view.
Page 4: Plan - side view.
Page 5: Plan - looking down view.
Page 6: The individual pieces.
Page 7: Materials list.
Page 8: Instructions.
Page 9: Instructions continued.
Page 10: Instructions continued.
Page 11: Instructions continued.
Page 12: Instructions continued.
Page 13: Instructions continued.

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Published Date: 2009

Your Total:

Options

Giant Garden Wishing Well Woodworking Plan - Paper plan
Item: 24-010PAPER
USD 8.00 | 8 Points | In Stock
Giant Garden Wishing Well Woodworking Plan - PDF plan
Item: 24-010PDF
USD 5.00 | 5 Points | In Stock

Tracing Paper Options

Tracing Paper 19x51inch, 1 sheet
Item: 05-TRACEPAPER-1
USD 3.95 | In Stock
Tracing Paper 19x51inch, 5 sheets
Item: 05-TRACEPAPER-5
USD 7.95 | In Stock
About

This product plan is scaled (not all parts may be full size) and fully dimensioned computer generated drawings on standard sheets of paper (8.5 x 11 inch). All details are given to reproduce each part using scaled drawings. Our most often asked question for this plan: Can I sell an item that I build from this plan? The answer is: Yes. You can do what you like with any item made from a #24 series plan. It is the plan that is copyright protected - not the item that you build from that plan.

Copyright Statement

You Might Also Like...

Adirondack Wishing Well Woodworking Plan

Our uncomplicated and well styled design uses standard lumber to make this piece of outdoor furniture easy to build. Build from pine and apply a stain to finish it how you like.

USD 16.99
16 Points | In Stock
Large Wishing Well Woodworking Plan.

The base is made from short pieces of 2x4 inch stock lumber. Ideal use for scrap wood. Special ledges inside let you raise and lower the plant platform in 1-1/2 inch increments. Roof allows some sun ...

USD 23.95
23 Points | In Stock
Small Wishing Well Woodworking Plan

This wishing well is just the right size for a deck, patio or even as an indoor decoration. The base is made from short lengths of 2x2 lumber. The plywood roof stained, shingled or covered with metal. This woodworking plan provides full size illustrations.

USD 11.99
11 Points | In Stock
Jill and Dog for Large Wishing Well Woodworking Plan

Jill and her dog watch intently as the water runs out the bottom of the bucket and disappears back down into the well. This woodworking plan provides full size illustrations, exploded view diagrams, lumber layouts and instructions to make the projects shown.

USD 17.99
17 Points | In Stock
Jack and Leaky Bucket for Large Wishing Well Woodworking Plan

Jack and Jill went up the hill to fetch a pail of water. The only problem is, the well has a leaky bucket. The water runs out of the holes in the bottom of the bucket. A submersible pond pump (available at hardware stores and garden centres) pumps the water from a large bucket.

USD 17.99
17 Points | In Stock
Oriole Wishing Well Woodworking Plan.

This oriole feeder is based on a miniature version of the classic American yard wishing well. This one is made from a 5/8 inch thick cedar fence board which keeps building costs very low.

USD 11.99
11 Points | In Stock
Giant Garden Wishing Well Woodworking Plan

This wooden wishing well is relatively easy to construct using common size lumber and will be the feature in any garden or yard. The wishing well is almost 900mm (3ft)in diameter and stands almost...

From USD 5.00
5+ Points | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
Kneeling Soldier at Fallen Soldiers Cross Yard Art Silhouette Pattern
Maritime Maple Leaf Chair Woodworking Plan
Folding Bench Picnic Table Woodworking Plan with Full Size Templates
Sasquatch Family Yard Art Woodworking Pattern
Yard Art Wind Mobiles Woodworking Plans and Projects
Your Free Woodworking Plans and Projects Search Engine Since 1998
WoodworkersWorkshop
Your Cart
Your Cart: Empty
© 1998-2025 WoodworkersWorkshop, all rights reserved worldwide.
Kryptronic eCommerce, Copyright 1999-2025 Kryptronic, Inc. - https://kryptronic.com/ [0.039707 / 1.644798]