Meisel Wood Hobby
The delicate light from the frosted tip bulb reminds us of an age old gas light. Holly leaves are cut out from 1/2 inch thick wood and the berries were made using pre-drilled wood balls attached with dowels. The post is assembled using four strips of 3/4 inch thick lumber. This leaves a hollow centre for the cord.
19_W2097
19-W2097
16.99
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/19_W2097
The delicate light from the frosted tip bulb reminds us of an age old gas light. Holly leaves are cut out from 1/2 inch thick wood and the berries were made using pre-drilled wood balls attached with dowels. The post is assembled using four strips of 3/4 inch thick lumber. This leaves a hollow centre for the cord. This plan includes suggested locations for leaves and holly berries on the sides and front of the lamp post. The finished project stands approximately 57 inches tall. This woodworking plan provides full size illustrations, exploded view diagrams and instructions to make the projects shown.
The delicate light from the frosted tip bulb reminds us of an age old gas light. Holly leaves are cut out from 1/2 inch thick wood and the berries were made using pre-drilled wood balls attached with dowels. The post is assembled using four strips of 3/4 inch thick lumber. This leaves a hollow centre for the cord.
This cedar lamp post has a lift out bar so you can easily change banners for any occasion. Designed to be used with low voltage landscape lighting. Additional lamp tops can be made to provide matching cedar housings for the remaining low voltage lights in the set.
Grab some 1x8 lumber and a piece of 2x12 to build this awesome porch display! A sensational snowman decoration. A flame tip light bulb can be used to make the old fashion lantern look complete.
These friendly bullfrogs will add charm to your landscape day or night. Cut the frogs from 3/4 inch pine on your scroll saw. Frogs sit on sections of 5" fence post. Add a solar light or low voltage l...
