WoodworkersWorkshop®
This water pump match holder is handy in the kitchen, on the fireplace mantle or by the wood stove. The design is simple to make. Scrap wood is all you need and an interesting striker rock! Easily sca...
05_WP_031
05-WP-031
2.95
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/05_WP_031
Plan Author: WoodworkersWorkshop
Plan Contributors: TJ Fritts
Plan Publisher: WoodchuckCanuck.com, Inc.
Published Date: 2011
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Wood and/or Supplies needed: Scrap wood!
Tools needed: Scrollsaw and other common workshop tools
Workshop Tips included: A full one page list of scrollsawing work shop tips!
This water pump match holder is handy in the kitchen, on the fireplace mantle or by the wood stove. The design is simple to make. Scrap wood is all you need and an interesting striker rock! Easily sca...
Make a replica of an old fashioned pump and place it next to your wooden barrel, galvanized basin or yard pond. A hidden submersible recirculating pump keeps water pouring out of the pump and back into the container. This woodworking plan provides full size illustrations and exploded view diagrams.
Water flows from this old fashioned water pump into a bucket or sprinkler can below. A submersible water pump (available at a hardware store) pumps the water upward and out the pump spout. The pump body utilizes a low cost landscape post. Measures 37 inches tall.
