Height: 9.25 inches (23.5 cm)
Plan Author: WoodworkersWorkshop
Plan Contributors: TJ Fritts
Plan Size: 0.4MB, 4 pages
Plan Publisher: WoodchuckCanuck.com, Inc.
Published Date: 2011
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Wood and/or Supplies needed: Scrap wood!
Tools needed: Scrollsaw and other common workshop tools
Workshop Tips included: A full one page list of scrollsawing work shop tips!
Woodworking patterns designed and produced by WoodworkersWorkshop®.
© 2011 WoodworkersWorkshop®. All rights reserved. The purchaser of this pattern is hereby granted a limited license to make no more than five (5) copies of this pattern for personal use or to sell at craft shows. The written consent of WoodchuckCanuck.com, Inc. is required to build, copy or sell more than five (5) copies of this pattern or to make more than five (5) finished parts any section of this pattern. Any further copying or other use of this pattern, in whole or in part, such as making kits from pre-cut templates, mass production or commercial usage, or any other unauthorized use, is strictly prohibited. Please see the “Copyright & Store Policies Page”.
Great for a beginner like me. Turned out nice.
Submitted by: Paul P. on 01/06/2017 08:04:34 PM
These wine racks are easy to make and customize. Add more levels, make the racks longer, scroll saw the ends for a more ornate rack, then stain or paint as desired. Easily scale the pattern on your pr...
This simple to build wine rack holds 24 bottles! Compact design is large enough to stand alone on the floor yet small enough to fit on a countertop. Make it from 1x12 oak or pine boards, no edge gluing required.
Up to ten bottles can be stored in this container. From 1/4 inch thick plywood, a magnificent scroll saw vine and grape design is displayed (24x24 inches). Designed to be used on the floor, a table, or a counter. Stunning birch veneer with birch plywood inlays.
Store up to two dozen wine glasses safely. Three pieces of 1/4 x 12 x 12 inch plywood and 3/4 inch thick hardwood were used to make this simple structure. This wall-mounted cabinet is a perfect match for our #19-W3190 Wine Caddy. All patterns are full size drawings.
Bears like wine too! A perfect accent for the cabin and a great gift or for anyone who loves wildlife. Project holds a wine bottle at an angle so the cork stays moist. Easy to cut from 7/16 and 3/4 inch pine. All patterns drawn FULL SIZE. Bear measures approximately 12 inches long.
Welcome your guests with a glass of wine. This convenient server fits almost anywhere. It holds a bottle of wine and four wine glasses. Project swivels on a Lazy Susan bearing.
Make this project as pictured or extend it to hold additional wine bottles. Holds bottles at correct angle to keep corks from drying out. Can be extended in 6-1/2 inch intervals for each additional wine bottle.
This easy-to-build stackable wine rack holds 6 bottles on each layer.
Looking for a handsome, versatile serving piece with plenty of storage for fine dinnerware and linens? This traditional oak beauty, with three spacious cupboards and drawers and seven adjustable shelves...
We also sell a PDF downloadable version. Keep your favorite wines, stemware, and serving accessories handy in this stylish unit. Do not let the sophisticated look of this project fool you. With straightforward case and drawer construction, ...
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.