WoodworkersWorkshop®
This 5 inch diameter CBN wheel is specially made to fit the Ripper37® 10º sawmill blade profile for the purposes of sharpening.
05_WC_1533
05-WC-1533
119.96
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/05_WC_1533
WoodworkersWorkshop®
This 5 inch diameter CBN wheel is specially made to fit the Ripper37® 10º sawmill blade profile for the purposes of sharpening.
05_WC_1533
05-WC-1533
119.96
WoodworkersWorkshop
https://woodworkersworkshop.com/Item/05_WC_1533
This 5 inch diameter CBN wheel is specially made to fit the Ripper37® 10º sawmill blade profile for the purposes of sharpening. The wheel has a 1/2 inch diameter arbor hole and ideally suited for the Wood-mizer BMS250 sharpening system. It also can fit on a standard bench top grinder if you wish to hand sharpen your sawmill blade. You can now take any brand 10º blade and make it the profile of a Ripper37®.
This 5 inch diameter CBN wheel is specially made to fit the Ripper37® 7º sawmill blade profile for the purposes of sharpening.
This 5 inch diameter CBN wheel is specially made to fit the Ripper37® 10º sawmill blade profile for the purposes of sharpening.
This 5 inch diameter CBN wheel is specially made to fit the 13 deg Håkansson® sawmill blade profile for the purposes of sharpening.
This 5 inch diameter CBN wheel is specially made to fit the 7º/39.5º Woodmizer® sawmill blade profile for the purposes of sharpening sawmill blades.
This 5 inch diameter CBN wheel is specially made to fit the 10º/30º Woodmizer® sawmill blade profile for the purposes of sharpening sawmill blades.
