Height: 37 inches (94 cm)
Width: 17 inches (43.2 cm)
Depth: 15.75 inches (40 cm)
Plan Author: WoodworkersWorkshop®
Plan Publisher: WoodchuckCanuck.com, Inc.
Published Date: 2015
Plan Language: English
Wood and/or Supplies needed:
1 of 2 x 6 x 120 inches
1 of 1 x 6 x 96 inches
1 of 1 x 6 x 144 inches (or one 90 inches and one 56 inches)
Woodworking patterns designed and produced by WoodworkersWorkshop®. This is a paper plan set printed on wide format paper to accommodate the full scale drawings. Simply open up the pattern, trace the parts in place and get busy cutting your plywood! If you have custom size requirements, please contact us. Where given, all measurements are in inches.
© 2015 WoodworkersWorkshop®. All rights reserved. The purchaser of this pattern is hereby granted a limited license to make no more than five (5) copies of this pattern for personal use or to sell at craft shows. The written consent of WoodchuckCanuck.com, Inc. is required to build, copy or sell more than five (5) copies of this pattern or to make more than five (5) finished parts any section of this pattern. Any further copying or other use of this pattern, in whole or in part, such as making kits from pre-cut templates, mass production or commercial usage, or any other unauthorized use, is strictly prohibited. Please see the “Copyright & Store Policies Page”.
Was a lot of work but fits nicely with our other mission pieces. Thanks.
Submitted by: Russell on 02/16/2016 01:54:44 PM
Pros: very good layouts
Cons: mortise and tenons were new to me
The all mortise and tenons joints were a bit of a challenge for me but I like that the parts were all drawn full size.
Submitted by: John D. on 03/19/2015 11:21:28 PM
We are very proud to present our Mission style baby high chair! Made entirely with mortise and tenon joinery for a strong, long lasting piece of furniture you will pass down through generations. The project u...
Our Mission style chair with its gentle sweep of the legs make it a beautiful design. Complete mortise and tenon construction but you could use screws instead. Match it with our Mission style Dining T...
Our Mission style table with its gentle sweep of the legs make it a beautiful design. Complete mortise and tenon construction but you could use screws instead. Match it with our Mission style Dining...
A project that is pretty enough to be by itself. Yet our Mission style bench is a perfect compliment to our Mission style Dining Chair 05-WC-0945 and/or our Mission Style Dining Table 05-WC-0943. Comp...
Our Mission style quilt rack is a perfect compliment to our other Mission style furniture. Complete mortise and tenon construction but you could use screws instead. Use whatever wood material your bud...
A project that is pretty enough to be by itself. Yet our Mission style table compliments to our Mission style Dining Chair 05-WC-0945 and/or our Mission Style Dining Table 05-WC-0943.
One or more of these Mission style end tables would look great indoors or outdoors.A perfect compliment to our Mission style Dining Chair 05-WC-0945 and/or our Mission Style Dining Table 05-WC-0943. ...
A feature of this Mission style furniture piece is that the cabinet (top) is built separate from the table (bottom). This aids in moving the piece and allows you to build one or the other. Complete mo...
With our full size drawings you can build this folding Mission style chair. Useable as a sitting chair or as a ladder. Traditionally found in a library (hence the name), but also handy in the kitchen....
Complimenting our Mission style collection, the interior of this cabinet measures approximately 17.5 inches high, 24 inches wide and 15.25 inches deep. Choose to use tempered glass for a see through p...
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.