Height: 90 inches (228.6 cm)
Width: 32.3 inches (82 cm)
Length: 80.5 inches (204.5 cm)
Plan Author: WoodworkersWorkshop®
Plan Publisher: WoodchuckCanuck.com, Inc.
Published Date: 2015
Plan Language: English
Wood and/or Supplies needed:
3 sheets of plywood.
Tracing Paper 14-CARB2 is recommended.
Tools needed: Jig saw and other common workshop tools
Woodworking patterns designed and produced by WoodworkersWorkshop®.
© 2015 WoodworkersWorkshop®. All rights reserved. The purchaser of this pattern is hereby granted a limited license to make no more than five (5) copies of this pattern for personal use or to sell at craft shows. The written consent of WoodchuckCanuck.com, Inc. is required to build, copy or sell more than five (5) copies of this pattern or to make more than five (5) finished parts any section of this pattern. Any further copying or other use of this pattern, in whole or in part, such as making kits from pre-cut templates, mass production or commercial usage, or any other unauthorized use, is strictly prohibited. Please see the “Copyright & Store Policies Page”.
Thank you for the Moose 3-D plans!
Pros: Pieces fit perfectly.
I add 2x2 inside the legs to make them stronger. Not easy to assemble by one person but I found a way easier then what is explained on the plans. Put one side on the front and back parts, then lay it on the ground and put the legs. Make it stand, easier because less heavy that way. Then put the central part, then the other side. Finish with the ears and rack. I used stain instead off paint.
Submitted by: christian on 09/05/2019 05:26:40 PM
We hope you enjoy our moose artwork inspired by the Haida art of the west coast of Canada! Three sizes are included in this pattern package: 27.75 inches wide x 35 inches high; 8.5 inches wide x 10.75...
No hardware required to keep it together! Our design lets gravity do all the work! Our 3D moose is nearly LIFE SIZE and only requires 3 sheet of plywood to get this project made. A perfect way to get ...
This project would look great in the yard, on the porch, in a store window or anywhere you like! Choose to paint as little or as much detail as you want. Or experiment with the black silhouette to cre...
No hardware required to keep it together! Stores flat too! Our design lets gravity do all the work for you! Our 3D moose is nearly LIFE SIZE and only requires 2 sheet of plywood to get this project ma...
No hardware required to keep it together! Stores flat too! Our design lets gravity do all the work for you! Our 3D moose is nearly LIFE SIZE and only requires 1/2 sheet of plywood to get this project ...
In less than 15 minutes you can take a scrap piece of wood only a couple inches long and make yourself a decorative scarf ornament with your scrollsaw, our Moose Pet Pin. Also included is our Hummingb...
If you have a piece of plywood approximately 24 x 36 inches, you can make this project. Shown here made with 3/8 inch thick plywood. I used the scrollsaw for cutting the outlines and used the bandsaw ...
Measuring about 36 inches tall, this project would look great in the yard, on the porch, in a store window or anywhere you like! Choose to paint or stain or indoor or outdoor display. Or experiment wi...
Our moose antler rack silhouette pattern spans 36 inches across. Mount on a indoor or outdoor wall, like the side of a building. Full size drawings. Custom sizing available.
Our sheep antler rack silhouette patterns span 20 and 30 inches across. Mount on a indoor or outdoor wall, like the side of a building. Full size drawings. Custom sizing available.
Since 1998, we have curated the Internet's largest online woodworking resources database.
Our pre-approved, hand-picked DIY project resources are updated daily. We work hard to ensure our database contains only safe, accurate woodworking desitnations for woodworkers and hobby crafters.