Upper shelf keeps perfume and lotions handy. Each drawer can accommodate two jewelry organizers. Mounts on your wall at the perfect height for you. Patterns for this woodworking project are drawn to full scale. Measures 30 inches high x 19 inches wide x 9 inches deep with doors closed.
We created this project to be constructed entirely out of 1x4 lumber, minimising the need for cutting and streamlining the construction process. The cross piece strips are 1 inch wide. To rip these parts, use a table saw. The arbour is approximately 89 inches tall, 50 inches deep, and 88 inches broad overall. 36 inches wide on the interior. This woodworking plan includes exploded view schematics, instructions, and full-size pictures for all the sections requiring mitre or bevel cuts.
This small building's base is only 8 feet by 8 feet. Six feet by six feet, or the raised centre section, is just big enough for a modest table and two chairs. The compact size saves money on construction costs and occupies little room in your yard.
You can quickly and cheaply create stylish, comfy outdoor furniture using 1x4 lumber. This lumber is fairly affordable and easily accessible at practically any lumberyard. With 1x4 boards, all the pieces may be built with the least amount of waste and trimming. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects. This furniture will be simple to cut and put together, and the components will fit together perfectly. You'll adore this bench's durability and comfort.
Your garden entrance might be this lovely arch arbour. A 4x8 foot sheet of plywood and conventional timber sizes should be used. It is around 36 inches deep, 84 inches broad, and 91 inches tall. For stability, it is advised that the posts' bottom ends be secured to the ground. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
This small building's base is 10 by 10 feet. A modest table and two chairs can barely fit in the raised centre section's 6 x 6 foot size. The compact size saves money on construction costs and occupies little room in your yard. The projects depicted in this woodworking plan can be built using the images, exploded view schematics, and instructions provided.
A beautiful bridge to spruce up your yard. It can be used to cross a garden pond, but one is not necessary. A bridge can be used as a standalone ornament in the garden or on the grass. The bridge is 43 inches wide by 10 feet long, and it is supported by platforms that are 29 by 60 inches in size. An lovely yet simple overhanging arbour covers the bridge. Full-size images, exploded view diagrams, lumber layouts, and step-by-step directions are all included in this woodworking plan.
A lovely garden arbour for showing off your plant. Accommodates a clay pot with a regular 5 inch diameter. This woodworking design includes directions, exploded view diagrams, and full-size images to make the projects displayed.
Build this arbour independently or incorporate a porch swing (shown here, plan W2269 sold separately). This arbour measures just over 8 feet tall, 8 feet wide, and 4 feet deep when it is built. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.
This chisel features a gouge shape 3 mm deep x 20 mm wide (1/8 x 25/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This chisel features a gouge shape 9 mm deep x 13 mm wide (11/32 x 1/2 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This chisel features a gouge shape 5 mm deep x 12 mm wide (3/16 x 15/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This chisel features a flat shape 8 mm wide (5/16 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This backing pad kit provides you with a replacement kit or for an additional supply, that included one rubber backing pad 2 inch (51 mm) diameter disc, 2 flanges, 2 set screws and one hex key.
Self adhesive sanding discs, 2 inch (51 mm) diameter, 25 pcs, 80 grit.
This chisel features a No. 8 sweep and 7 mm wide (9/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This package of tradesperson chisels in combination with your Arbortechâ Power Chisel (or suitable converted 4 or 4.5 inch angle grinder) will make precise work of in any other number of situations where wood removal is needed, either a small or larger amount. Chisels are high strength steel and heat treated for best performance in hardness.
Self adhesive sanding discs, 2 inch (51 mm) diameter, 25 pcs, 320 grit.
Sanding discs, 2 inch (51 mm) diameter, 25 pcs, assorted grit with 2 flanges and 2 screws and 1 hex key.
This accessory will turn your angle grinder into a precision shaping tool. The clear, tough polycarbonate shield will allow you clear view of your work while redirecting the wood chips away from you. You should still use protective eye weer. The adjustable depth and allows you to still free hand carve your wood project. Suitable for shaping, trimming, slotting and cutting. Suits most 100mm (4 inch) and 115 mm (4.5 inch) angle grinders. This accessory tool can be used with the Arbortech product line of power carving woodworking tools.
This replacement Torxâ key are for securing Torxâ M3 screws, found on the Arbortechâ Industrail Woodcarver blade #63-IND-FG-100. The package contains one key. This accessory tool can be used with the Arbortechâ product line of power carving woodworking tools.
For use with your Arbortechâ mini grinder, this package contains four discs of120 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (screw is included).
This chisel features a V shape 12 mm deep x 8 mm wide (1/2 x 5/16 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This chisel features a gouge shape 7 mm deep x 20 mm wide (9/32 x 25/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This chisel features a gouge shape 11 mm deep x 7 mm wide (7/16 x 9/32 inch) cutting area. For use with your Arbortechâ Power Chisel or suitable converted 4 or 4.5 inch angle grinder.
This package of tradesperson chisels in combination with your Arbortechâ Power Chisel (or suitable converted 4 or 4.5 inch angle grinder) will make short work of joints, recesses, dovetails and any other number of situations were wood removal is needed, either a small or larger amount. Chisels are high strength steel and heat treated for best performance in hardness.
This flange kit provides you with a replacement parts or for an additional supply, that included five flanges to secure your 2 inch (51 mm) diameter sanding disc, 5 screws and one hex key.
These replacement screws are for the Arbortechâ Industrail Woodcarver blade #63-IND-FG-100. The package contains three of M3 Torxâ screws. The screws are high quality grade 12.9 Torxâ 9 head. This accessory tool can be used with the Arbortechâ product line of power carving woodworking tools.
For use with your Arbortechâ mini grinder, this package contains four discs of 40 grit 2 inch (50 mm) diameter heavy duty abrasive pads. The pads screw directly onto the mini grinder extension arm (screw is included).
For use with your Arbortechâ mini grinder or any appropriately sized grinder with the extension (supplied). Use with guided templates or freehand, the extension will allow for almost 2.75 inch of deep carving capability. Includes sanding pads in 40, 60, 80 and 120 grit as well.