Candle Holders

These tealight candle holders are made from scrap wood and are a quick and easy project for you this weekend. Follow along at the link to see just how to build them.

The hands of this frigid snowman are warmed by a votive light. From 1x8 lumber, cutting is simple. really simple painting and writing designs. Height of 11 inches. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

Here is an attractive pair of candle sticks which you can turn with the new carbide tipped turning chisels.

The design is Swedish. The finish is Swedish red and black gloss enamel. Turn the ring which forms the main part of the stem and then cut out a quarter section.

Graceful and distinctive, a pair of these spiral candlesticks will lend charm to any mantle. Maple, or some other hard, close-grained wood should be used. Each stick is made up from four separate turnings, held together by dowels.

This is a link to a Google 3D SketchUp drawing for a turned oak candle holder. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Build your own rustic wood star candleholder using some of the wood from your scrap pile. Be sure to pick out the candle you plan to use with this candleholder before you begin the project. Follow along to see how it was built.

A fun craft project offered by AOK Corral Craft and Gift Bazaar. All rights reserved.

A table center piece or mantel ornament that will brighten the Christmas spirit of any home can be easily made in a relatively short time.

The unique part of this project is the way in which these candle sticks may be dis-assembled and closed up to look like an ordinary turned box.

Here is a quick and easy project for you to make on the bandsaw, mustache candleholders.

What a great idea, a gift box that converts into a candle holder after the present is removed. This is a simple project to build and even more fun to give.

In actuality, this should really be called making a simple tea light holder inches as this is no more than a candle holder.

This project if for a wonderful little candle holder. We made it from a scrap piece of Walnut that we had lying around. It will take some imagination (or not) to really make it unique.

This article originally appeared in the Fall 98 edition of American Woodturner vol. 13, issue 3. The following text may vary slightly, as I am using my original version, not the edited version found in the magazine (although they are very close) because I do not have an electronic version of it. I have also used some different and additional photos.

This is a link to a Google 3D SketchUp drawing for candle holders that are easy to make. The look and style of the two holders change just by reversing and flipping the legs to be either bowed in or out. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Use wood from your scrap pile or reclaimed wood to build a few rustic candle holders. Follow along at this link to see how we did it.

Use as a centerpiece for your Thanksgiving table setting.

Raid your scrap pile and build a set or two of pillar candle holders using these free instructions.

Build a couple of these house shaped candle holders using thin plywood and hand tools. They could be finished a number of ways to give them a different look.

Learn the basics of spiral work and make an elegant candlestick in the process. A lathe, a few hand tools and some basic geometry are all you will need.

Use up the scraps in your wood box to turn out this fine set of candlesticks. Then apply a textured spray paint to give it a faux stone finish. Scroll down the page at this link to find the candlesticks.

Here is a quick and easy project with lots of impact for your table centerpiece. Free tutorial at the link.

Build your own pillar candle holders with this free and easy tutorial.

Here is a quick and easy project to bring some drama to your decor. Build a set of tea light candle holders using this free tutorial.

Build a couple of these fun round candle holders. All you will need is a little scrap wood and a scroll saw. Follow along at the link and find out how to build some for yourself.

Candelabra is just a fancy way of saying candle holder. It is made using different lengths of 2×2 lumber. You can make it more complex or as simple as you wish. The one shown has nine pieces, but you can go crazy if you want. Follow the instructions at the link.

Make these tea light candle stands with these free downloadable plans.

Use up your scrap plywood to make these awesome tea light candle holders. Here is how...

These candle holders are the perfect scrap wood project. Easy to make too. Follow the free plans at the link to see how.