Workshop Dust Collection Accessories at WoodworkersWorkshop.com

WoodworkersWorkshop.com is a woodworking site that lists almost 20,000 free woodworking plans, projects, free scroll sawing patterns and woodworking plans to buy.

This is the Workshop Dust Collection Accessories category of information.

This woodworkers list of free woodworking plans and projects features a collection of dust collection accessory devices and jigs that a beginner to moderately skilled do-it-yourselfer can build. The woodworking information found on these sites range in quantity and quality. Please contact individual web sites if you have questions about those woodworking projects.

	Sponsored Link:

Sponsored Link:

Total woodworking resources in this category: 34. Displaying Page 1.

	Adjustable Dust Control Tired of sawdust covering your workbench and woodworking tools? This adjustable vacuum hose holder attaches to the shop vacuum and can be rolled into position exactly where it is needed.
Link Type: free plans \| Wood Source: FamilyHandyman \| Fix Link?

	Air Filter for Workshop Computer After getting a new shop computer, all was happy until the computer case fans started to whine and make way too much noise. Popping the side off the case revealed about half a pound of dust bunnies and that the fans had a thick coat of crud on them. Given that the computer is used in an office attached to an industrial shop, a better solution was needed.
Link Type: free plans \| Wood Source: Overclockers \| Fix Link?

	Air Filter System, Homemade Equip your shop with an air filtration system you can easily make this efficient and necessary yet inexpensive shop accessory in a single afternoon.
Link Type: free plans \| Wood Source: Twisted Knot Workshop \| Fix Link?

	Benchtop Sanding Table Build a benchtop sanding table like this one to cut down on the amount of fine sawdust in the workshop after sanding a project.
Link Type: free plans \| Wood Source: WoodLogger \| Fix Link?

	Circular Saw Dust Collection Follow along as Jay builds a dust collection system for his circular saw. Smart.
Link Type: free plans \| Wood Source: JaysCustomCreations \| Fix Link?

	Downdraft Cabinet PDF The pivoting door design is great for wide open router access and will not SLAM shut when you forget to close the door before turning on your dust collector.
Link Type: free plans \| Wood Source: Incremental Tools \| Fix Link?

	Downdraft Sanding Table I could never justify spending $800 to $2000 on something that did not add another capability to my shop, but once I figured out a way to build one for a much lower cost, I realized it is worth whatever it costs.
Link Type: free plans \| Wood Source: LakeThompson \| Fix Link?

	Downdraft Sanding Table Box Follow along at the link and build your own downdraft sanding table box.
Link Type: free plans \| Wood Source: FixThisBuildThat \| Fix Link?

free plans woodworking resource from ShopNotes - drillpresses table fences free woodworking plans projects patterns

Drill Press Table and fence system (PDF)
When I turn to the drill press, it is because I need precisely placed and perfectly straight holes. But the standard, cast iron table will not support anything but the smallest workpiece. Then, trying to clamp a workpiece in place can be a frustrating exercise. And you can forget about dust collection. The table and fence system in ShopNotes No. 94 solves all these problems. It turns your drill press into a precision woodworking tool. The cutting diagrams and materials list are available to download in this Online Extra.

Link Type: free plans | Wood Source: ShopNotes | Fix Link?

	Drum Sander Vacuum Table Mounting a drum sander on a drill press is a great way to sand the edge of a curved workpiece. But it produces very fine sawdust that is unhealthy to breathe -- and a nuisance. So to cut down on the sawdust, I built an auxiliary drum sander table that works with my shop vacuum.
Link Type: free plans \| Wood Source: WoodworkingTips \| Fix Link?

	Dust bag for Mitersaws, MEGA Collecting sawdust from some mitersaws is about as efficient as catching a thunderstorm in a shot glass. But the big old bag dust catcher that I built for my mitersaw collects about 90 percent of the debris.
Link Type: free plans \| Wood Source: WOOD Magazine \| Fix Link?

	Dust Collection To make the plastic blast gate housings self-cleaning, I clipped the closed corners, as shown, to give the dust a means of escape. The slight draft through the corner holes when the gate is open does not noticeably take away from the collectors power.
Link Type: information \| Wood Source: WOOD Magazine \| Fix Link?

free plans woodworking resource from Google 3D - dust collection,workshops,sketchup,Google 3D,3-D warehouse,drawings,free woodworking plans,projects,do it yourself,woodworkers

Dust Collection Control Box
This is a link to a Google 3D SketchUp drawing for a dust collection control box that will control 4 different dust collection legs. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type: free plans | Wood Source: Google 3D | Fix Link?

	Dust Collection Cyclone The purpose of this site is to share what I have learned with other woodworkers about the hazards of wood dust and what I did to help protect myself and my family. This particular page steps you through the process I used to build a blower. A blower is a powerful high-speed device that if you build wrong could cause serious injury or damage.
Link Type: free plans \| Wood Source: Bill Pentz \| Fix Link?

	Dust Collection Cyclone Barrels, Blind Depth Gauge for By Grant in Iowa - Since the bin is under vacuum, the small air leaks around the dowel should be insignificant to system efficiency. You can then mark the dowel like a dipstick: Empty, 1/2 full, Full, and Holy schtick!
Link Type: free plans \| Wood Source: WoodCentral \| Fix Link?

free plans woodworking resource from Google 3D - dust collection,jigs,sketchup,Google 3D,3-D warehouse,floor sweep,drawings,free woodworking plans,projects,do it yourself,woodworkers

Dust Collection Floor Sweep
This is a link to a Google 3D SketchUp drawing for a floor sweep for woodworking shop 4 inch dust collection system. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type: free plans | Wood Source: Google 3D | Fix Link?

	Dust Collection Pipe Hanger Brackets These wall mounted brackets are stack cut on the bandsaw. Here is a free tutorial to build your own brackets for your dust collection system.
Link Type: free plans \| Wood Source: JaysCustomCreations \| Fix Link?

	Dust Collection System I designed an overhead swiveling fixture that allows me to move a dust-collection hose to any machine in my shop, quickly and easily.
Link Type: free plans \| Wood Source: American Woodworker \| Fix Link?

	Dust Collection, RV Hose Fittings See how WOOD magazine reader John Hardy used RV sewer hose fittings for quick disconnects.
Link Type: free plans \| Wood Source: WOOD Magazine \| Fix Link?

free plans woodworking resource from Google 3D - dust collection,blast gate,sketchup,Google 3D,3-D warehouse,workshops,dust control,drawings,free woodworking plans,projects,do it yourself,woodworkers

Dust Collector Blast Gate
This is a link to a Google 3D SketchUp drawing for a shopmade blast gate for use with 6 inch ducting. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Link Type: free plans | Wood Source: Google 3D | Fix Link?

More Woodworking Information on these Workshop Pages:1 2 next last